typing cmd into the Open field and then clicking OK.
On the command line in the window, type: ipconfig /release and press
the Enter key.
Once the command prompt is re-displayed, type: ipconfig /renew and
press the Enter key.
Once the command prompt is re-displayed, enter the Px's IP address
(192.168.2.254) into the address field of the PC's web browser and
click Go.
Change the Px's network settings:
Into the Boot Server IP Address field, enter the Allworx server's LAN IP
address.
Into the Plug and Play Secret Key field, enter the Allworx server's Plug
and Play key.
If the Px Password has not been set, set it by entering a password into
the New Password and Confirm Password fields. We recommend
using the Px's MAC address or use the same password as the
Allworx server. In any case, save a copy of the password.
Click Update.
Click Restart. Click OK on the confirmation boxes.
To get into Normal Mode, wait until the Restart sequence starts (Power
LED is flashing). Unplug the service PC's cable from the Px and
connect the Px to the customer's network.
Forward the following ports through the remote site's firewall. These ports
must be forwarded through any firewall that is between the Px and
the Allworx server:
2088 (UDP) 5060 (UDP) 8081 (TCP) 15000-15511 (UDP)
-How do I get into the Allworx Px 6/2 Expander’s Configuration
Mode?
Remove the power and Ethernet cables from the Px unit.
Plug the power back into the Px unit. Make sure the Ethernet is not
connected. Wait for the Power and Port LEDs to go solid amber
(about 45 seconds). This indicates that it is in Configuration Mode.
Connect the service PC directly to the unit using an Ethernet cable.
DHCP is enabled on the Px unit while in Configuration Mode.
Open a command window on the service PC by clicking Start, Run, then
typing cmd into the Open field and then clicking OK.
On the command line in the window, type: ipconfig /release and press
the Enter key.
Once the command prompt is re-displayed, type: ipconfig /renew and
press the Enter key.
Comentarios a estos manuales